Hardware inventory: IBM Netfinity 4000R

Model	Netfinity 4000R
Manufacturer	International Business Machines
CPU	Dual Pentium III 733MHz (256kb L2 Cache)
Memory	1280 MB (3x256MB+1x512 ECC 168-pin)
Internal storage	2 x 80Gb Maxtor 6Y080L0 (E)IDE
Peripherals	Dual Intel i82559 ethernet controllers
Operating system	NetBSD 2.0
Bootup sequence

NetBSD 2.0_RC5 (OUANDA.MP) #0: Tue Nov 23 22:45:15 CET 2004
        tnn@stinkpad:/l/src/sys/arch/i386/compile/OUANDA.MP
total memory = 1279 MB
avail memory = 1247 MB
BIOS32 rev. 0 found at 0xfd6b1
mainbus0 (root)
mainbus0: Intel MP Specification (Version 1.1) (IBM ENSW Kiowa SMP   )
cpu0 at mainbus0: apid 1 (boot processor)
cpu0: Intel Pentium III (686-class), 745.04 MHz, id 0x681
cpu0: features 387fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu0: features 387fbff<PGE,MCA,CMOV,PAT,PSE36,PN,MMX>
cpu0: features 387fbff<FXSR,SSE>
cpu0: I-cache 16 KB 32B/line 4-way, D-cache 16 KB 32B/line 4-way
cpu0: L2 cache 256 KB 32B/line 8-way
cpu0: ITLB 32 4 KB entries 4-way, 2 4 MB entries fully associative
cpu0: DTLB 64 4 KB entries 4-way, 8 4 MB entries 4-way
cpu0: serial number 0000-0681-0000-99A9-0D04-679E
cpu0: calibrating local timer
cpu0: apic clock running at 99 MHz
cpu0: 8 page colors
cpu1 at mainbus0: apid 0 (application processor)
cpu1: starting
cpu1: Intel Pentium III (686-class), 745.00 MHz, id 0x681
cpu1: features 387fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu1: features 387fbff<PGE,MCA,CMOV,PAT,PSE36,PN,MMX>
cpu1: features 387fbff<FXSR,SSE>
cpu1: I-cache 16 KB 32B/line 4-way, D-cache 16 KB 32B/line 4-way
cpu1: L2 cache 256 KB 32B/line 8-way
cpu1: ITLB 32 4 KB entries 4-way, 2 4 MB entries fully associative
cpu1: DTLB 64 4 KB entries 4-way, 8 4 MB entries 4-way
cpu1: serial number 0000-0681-0003-0961-6959-B090
mpbios: bus 0 is type PCI
mpbios: bus 1 is type PCI
mpbios: bus 2 is type PCI
mpbios: bus 3 is type ISA
ioapic0 at mainbus0 apid 14 (I/O APIC)
ioapic0: pa 0xfec00000, version 11, 24 pins
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: Intel 82443GX Host Bridge/Controller (rev. 0x00)
agp0 at pchb0: aperture at 0xf0000000, size 0x4000000
ppb0 at pci0 dev 1 function 0: Intel 82443GX AGP Interface (rev. 0x00)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vga1 at pci1 dev 0 function 0: Chips and Technologies 69000 (rev. 0x64)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
pcib0 at pci0 dev 7 function 0
pcib0: Intel 82371AB PCI-to-ISA Bridge (PIIX4) (rev. 0x02)
piixide0 at pci0 dev 7 function 1
piixide0: Intel 82371AB IDE controller (PIIX4) (rev. 0x01)
piixide0: bus-master DMA support present
piixide0: primary channel wired to compatibility mode
piixide0: primary channel ignored (disabled)
piixide0: secondary channel wired to compatibility mode
piixide0: secondary channel ignored (disabled)
uhci0 at pci0 dev 7 function 2: Intel 82371AB USB Host Controller (PIIX4) (rev. 0x01)
pci_intr_map: no mapping for pin D (line=ff)
uhci0: couldn't map interrupt
Intel 82371AB Power Management Controller (PIIX4) (miscellaneous bridge, revision 0x02) at pci0 dev 7 function 3 not configured
fxp0 at pci0 dev 17 function 0: i82559 Ethernet, rev 8
fxp0: interrupting at ioapic0 pin 18 (irq 10)
fxp0: Ethernet address 00:06:29:de:93:50
inphy0 at fxp0 phy 1: i82555 10/100 media interface, rev. 4
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp1 at pci0 dev 18 function 0: i82559 Ethernet, rev 8
fxp1: interrupting at ioapic0 pin 17 (irq 11)
fxp1: Ethernet address 00:06:29:de:93:51
inphy1 at fxp1 phy 1: i82555 10/100 media interface, rev. 4
inphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ppb1 at pci0 dev 20 function 0: Digital Equipment DECchip 21152 PCI-PCI Bridge (rev. 0x03)
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
pdcide0 at pci2 dev 15 function 0
pdcide0: Promise Ultra133/ATA Bus Master IDE Accelerator (rev. 0x02)
pdcide0: bus-master DMA support present
pdcide0: primary channel configured to native-PCI mode
pdcide0: using ioapic0 pin 16 (irq 9) for native-PCI interrupt
atabus0 at pdcide0 channel 0
pdcide0: secondary channel configured to native-PCI mode
atabus1 at pdcide0 channel 1
isa0 at pcib0
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
isapnp0: no ISA Plug 'n Play devices found
ioapic0: enabling
Kernelized RAIDframe activated
wd0 at atabus0 drive 0: <Maxtor 6Y080L0>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 76293 MB, 155009 cyl, 16 head, 63 sec, 512 bytes/sect x 156250000 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd0(pdcide0:0:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA data transfers)
wd1 at atabus1 drive 0: <Maxtor 6Y080L0>
wd1: drive supports 16-sector PIO transfers, LBA addressing
wd1: 76293 MB, 155009 cyl, 16 head, 63 sec, 512 bytes/sect x 156250000 sectors
wd1: 32-bit data port
wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd1(pdcide0:1:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA data transfers)
raid0: RAID Level 1
raid0: Components: /dev/wd1f /dev/wd0f
raid0: Total Sectors: 117165824 (57209 MB)
boot device: raid0
root on raid0a dumps on raid0b
root file system type: ffs
cpu1: CPU 0 running
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)