Hardware inventory: Data General Quadbox
To index
| Model | AViiON |
| Manufacturer | Data General |
| CPU | Four 200MHz Intel Pentium Pro, 512kb L2 cache |
| Memory | 512 MB |
| Internal storage | None |
| External storage | 1 x MAXTOR 6L080J4 (80Gb EIDE) |
| Operating system | Debian GNU/Linux |
| Additional notes | |
Bootup sequence
Linux version 2.6.0-test11 (root@third) (gcc version 2.95.4 20011002 (Debian prerelease)) #2 SMP Sun Dec 14 18:53:31 CET 2003
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 0000000000100000 - 0000000020000000 (usable)
BIOS-e820: 00000000fec00000 - 00000000fec09000 (reserved)
BIOS-e820: 00000000ffe80000 - 0000000100000000 (reserved)
512MB LOWMEM available.
found SMP MP-table at 000f75a0
hm, page 000f7000 reserved twice.
hm, page 000f8000 reserved twice.
hm, page 000f7000 reserved twice.
hm, page 000f8000 reserved twice.
On node 0 totalpages: 131072
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 126976 pages, LIFO batch:16
HighMem zone: 0 pages, LIFO batch:1
DMI not present.
ACPI: Unable to locate RSDP
Intel MultiProcessor Specification v1.4
Virtual Wire compatibility mode.
OEM ID: INTEL Product ID: ALDER APIC at: 0xFEC08000
Processor #0 6:1 APIC version 17
Processor #4 6:1 APIC version 17
Processor #1 6:1 APIC version 17
Processor #2 6:1 APIC version 17
I/O APIC #14 Version 17 at 0xFEC00000.
Enabling APIC mode: Flat. Using 1 I/O APICs
Processors: 4
Building zonelist for node : 0
Kernel command line: BOOT_IMAGE=Linux260t11 ro root=2102
Initializing CPU#0
PID hash table entries: 4096 (order 12: 32768 bytes)
Detected 198.969 MHz processor.
Console: colour VGA+ 80x25
Memory: 515120k/524288k available (1598k kernel code, 8420k reserved, 682k data, 408k init, 0k highmem)
Calibrating delay loop... 388.09 BogoMIPS
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: After generic identify, caps: 0000fbff 00000000 00000000 00000000
CPU: After vendor identify, caps: 0000fbff 00000000 00000000 00000000
CPU: L1 I cache: 8K, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: After all inits, caps: 0000f3ff 00000000 00000000 00000040
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
CPU0: Intel Pentium Pro stepping 07
per-CPU timeslice cutoff: 1467.70 usecs.
task migration cache decay timeout: 2 msecs.
masked ExtINT on CPU#0
ESR value before enabling vector: 00000040
ESR value after enabling vector: 00000000
Booting processor 1/1 eip 2000
Initializing CPU#1
masked ExtINT on CPU#1
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Calibrating delay loop... 396.28 BogoMIPS
CPU: After generic identify, caps: 0000fbff 00000000 00000000 00000000
CPU: After vendor identify, caps: 0000fbff 00000000 00000000 00000000
CPU: L1 I cache: 8K, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: After all inits, caps: 0000f3ff 00000000 00000000 00000040
CPU1: Intel Pentium Pro stepping 07
Booting processor 2/2 eip 2000
Initializing CPU#2
masked ExtINT on CPU#2
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Calibrating delay loop... 396.28 BogoMIPS
CPU: After generic identify, caps: 0000fbff 00000000 00000000 00000000
CPU: After vendor identify, caps: 0000fbff 00000000 00000000 00000000
CPU: L1 I cache: 8K, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: After all inits, caps: 0000f3ff 00000000 00000000 00000040
CPU2: Intel Pentium Pro stepping 07
Booting processor 3/4 eip 2000
Initializing CPU#3
masked ExtINT on CPU#3
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Calibrating delay loop... 396.28 BogoMIPS
CPU: After generic identify, caps: 0000fbff 00000000 00000000 00000000
CPU: After vendor identify, caps: 0000fbff 00000000 00000000 00000000
CPU: L1 I cache: 8K, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: After all inits, caps: 0000f3ff 00000000 00000000 00000040
CPU3: Intel Pentium Pro stepping 07
Total of 4 processors activated (1576.96 BogoMIPS).
ENABLING IO-APIC IRQs
Setting 14 in the phys_id_present_map
...changing IO-APIC physical APIC ID to 14 ... ok.
init IO_APIC IRQs
IO-APIC (apicid-pin) 14-0 not connected.
..TIMER: vector=0x31 pin1=2 pin2=0
number of MP IRQ sources: 16.
number of IO-APIC #14 registers: 16.
testing the IO APIC.......................
IO APIC #14......
.... register #00: 0E000000
....... : physical APIC id: 0E
....... : Delivery Type: 0
....... : LTS : 0
.... register #01: 000F0011
....... : max redirection entries: 000F
....... : PRQ implemented: 0
....... : IO APIC version: 0011
.... register #02: 00000000
....... : arbitration: 00
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 000 00 1 0 0 0 0 0 0 00
01 001 01 0 0 0 0 0 1 1 39
02 001 01 0 0 0 0 0 1 1 31
03 001 01 0 0 0 0 0 1 1 41
04 001 01 0 0 0 0 0 1 1 49
05 001 01 0 0 0 0 0 1 1 51
06 001 01 0 0 0 0 0 1 1 59
07 001 01 0 0 0 0 0 1 1 61
08 001 01 0 0 0 0 0 1 1 69
09 001 01 1 1 0 0 0 1 1 71
0a 001 01 1 1 0 0 0 1 1 79
0b 001 01 1 1 0 0 0 1 1 81
0c 001 01 0 0 0 0 0 1 1 89
0d 001 01 0 0 0 0 0 1 1 91
0e 001 01 0 0 0 0 0 1 1 99
0f 001 01 1 1 0 0 0 1 1 A1
IRQ to pin mappings:
IRQ0 -> 0:2
IRQ1 -> 0:1
IRQ3 -> 0:3
IRQ4 -> 0:4
IRQ5 -> 0:5
IRQ6 -> 0:6
IRQ7 -> 0:7
IRQ8 -> 0:8
IRQ9 -> 0:9
IRQ10 -> 0:10
IRQ11 -> 0:11
IRQ12 -> 0:12
IRQ13 -> 0:13
IRQ14 -> 0:14
IRQ15 -> 0:15
.................................... done.
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 198.0926 MHz.
..... host bus clock speed is 66.0308 MHz.
checking TSC synchronization across 4 CPUs: passed.
Starting migration thread for cpu 0
Bringing up 1
CPU 1 IS NOW UP!
Starting migration thread for cpu 1
Bringing up 2
CPU 2 IS NOW UP!
Starting migration thread for cpu 2
Bringing up 3
CPU 3 IS NOW UP!
Starting migration thread for cpu 3
CPUS done 8
NET: Registered protocol family 16
EISA bus registered
PCI: PCI BIOS revision 2.10 entry at 0xfd091, last bus=1
PCI: Using configuration type 1
SCSI subsystem initialized
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
PCI: i440KX/GX host bridge 0000:00:19.0: secondary bus 00
PCI: i440KX/GX host bridge 0000:00:1a.0: secondary bus 01
PCI: Cannot allocate resource region 0 of device 0000:00:0f.0
PCI: Cannot allocate resource region 1 of device 0000:00:0f.0
PCI: Cannot allocate resource region 2 of device 0000:00:0f.0
PCI: Cannot allocate resource region 3 of device 0000:00:0f.0
PCI: Cannot allocate resource region 4 of device 0000:00:0f.0
PCI: Cannot allocate resource region 5 of device 0000:00:0f.0
PCI: Error while updating region 0000:00:0f.0/1 (20000408 != 20000008)
PCI: Error while updating region 0000:00:0f.0/2 (20000808 != 20000008)
PCI: Error while updating region 0000:00:0f.0/3 (20000c08 != 20000008)
PCI: Error while updating region 0000:00:0f.0/4 (20001008 != 20000008)
PCI: Error while updating region 0000:00:0f.0/5 (20001408 != 20000008)
Starting balanced_irq
pty: 256 Unix98 ptys configured
Real Time Clock Driver v1.12
Using anticipatory io scheduler
Floppy drive(s): fd0 is 1.44M
FDC 0 is an 82078.
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: loaded (max 8 devices)
3c59x: Donald Becker and others. www.scyld.com/network/vortex.html
0000:01:0e.0: 3Com PCI 3c905B Cyclone 100baseTx at 0xfc00. Vers LK1.1.19
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PDC20267: IDE controller at PCI slot 0000:01:0a.0
PDC20267: chipset revision 2
PDC20267: 100% native mode on irq 11
PDC20267: (U)DMA Burst Bit ENABLED Primary MASTER Mode Secondary MASTER Mode.
ide2: BM-DMA at 0xfc80-0xfc87, BIOS settings: hde:pio, hdf:pio
ide3: BM-DMA at 0xfc88-0xfc8f, BIOS settings: hdg:DMA, hdh:pio
hde: MAXTOR 6L080J4, ATA DISK drive
ide2 at 0xfcf8-0xfcff,0xfcf6 on irq 11
hde: max request size: 128KiB
hde: 156355584 sectors (80054 MB) w/1819KiB Cache, CHS=65535/16/63, UDMA(100)
hde: hde1 hde2 hde3 hde4 < hde5 hde6 hde7 hde8 >
ahc_pci:1:11:0: Using left over BIOS settings
ahc_pci:1:12:0: Using left over BIOS settings
scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.35
<Adaptec aic7880 Ultra SCSI adapter>
aic7880: Ultra Wide Channel A, SCSI Id=7, 16/253 SCBs
scsi1 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.35
<Adaptec aic7880 Ultra SCSI adapter>
aic7880: Ultra Wide Channel A, SCSI Id=7, 16/253 SCBs
(scsi1:A:0): 40.000MB/s transfers (20.000MHz, offset 8, 16bit)
(scsi1:A:0): 20.000MB/s transfers (20.000MHz, offset 15)
(scsi1:A:1): 40.000MB/s transfers (20.000MHz, offset 8, 16bit)
(scsi1:A:1): 20.000MB/s transfers (20.000MHz, offset 15)
(scsi1:A:2): 40.000MB/s transfers (20.000MHz, offset 8, 16bit)
(scsi1:A:2): 20.000MB/s transfers (20.000MHz, offset 15)
(scsi1:A:3): 40.000MB/s transfers (20.000MHz, offset 8, 16bit)
(scsi1:A:3): 20.000MB/s transfers (20.000MHz, offset 15)
(scsi1:A:4): 40.000MB/s transfers (20.000MHz, offset 8, 16bit)
(scsi1:A:4): 20.000MB/s transfers (20.000MHz, offset 15)
(scsi1:A:5): 40.000MB/s transfers (20.000MHz, offset 8, 16bit)
(scsi1:A:5): 20.000MB/s transfers (20.000MHz, offset 15)
Vendor: DEC Model: RZ1DF-CB (C) DEC Rev: 0371
Type: Direct-Access ANSI SCSI revision: 02
scsi1:A:0:0: Tagged Queuing enabled. Depth 253
Vendor: DEC Model: RZ1DF-CB (C) DEC Rev: 0371
Type: Direct-Access ANSI SCSI revision: 02
scsi1:A:1:0: Tagged Queuing enabled. Depth 253
Vendor: DEC Model: RZ1DF-CB (C) DEC Rev: 0371
Type: Direct-Access ANSI SCSI revision: 02
scsi1:A:2:0: Tagged Queuing enabled. Depth 253
Vendor: DEC Model: RZ1DF-CB (C) DEC Rev: 0371
Type: Direct-Access ANSI SCSI revision: 02
scsi1:A:3:0: Tagged Queuing enabled. Depth 253
Vendor: DEC Model: RZ1DF-CB (C) DEC Rev: 0371
Type: Direct-Access ANSI SCSI revision: 02
scsi1:A:4:0: Tagged Queuing enabled. Depth 253
Vendor: DEC Model: RZ1DF-CB (C) DEC Rev: 0371
Type: Direct-Access ANSI SCSI revision: 02
scsi1:A:5:0: Tagged Queuing enabled. Depth 253
st: Version 20030811, fixed bufsize 32768, s/g segs 256
SCSI device sda: 17773524 512-byte hdwr sectors (9100 MB)
SCSI device sda: drive cache: write through
sda: unknown partition table
Attached scsi disk sda at scsi1, channel 0, id 0, lun 0
SCSI device sdb: 17773524 512-byte hdwr sectors (9100 MB)
SCSI device sdb: drive cache: write through
sdb: unknown partition table
Attached scsi disk sdb at scsi1, channel 0, id 1, lun 0
SCSI device sdc: 17773524 512-byte hdwr sectors (9100 MB)
SCSI device sdc: drive cache: write through
sdc: unknown partition table
Attached scsi disk sdc at scsi1, channel 0, id 2, lun 0
SCSI device sdd: 17773524 512-byte hdwr sectors (9100 MB)
SCSI device sdd: drive cache: write through
sdd: unknown partition table
Attached scsi disk sdd at scsi1, channel 0, id 3, lun 0
SCSI device sde: 17773524 512-byte hdwr sectors (9100 MB)
SCSI device sde: drive cache: write through
sde: unknown partition table
Attached scsi disk sde at scsi1, channel 0, id 4, lun 0
SCSI device sdf: 17773524 512-byte hdwr sectors (9100 MB)
SCSI device sdf: drive cache: write through
sdf: unknown partition table
Attached scsi disk sdf at scsi1, channel 0, id 5, lun 0
Attached scsi generic sg0 at scsi1, channel 0, id 0, lun 0, type 0
Attached scsi generic sg1 at scsi1, channel 0, id 1, lun 0, type 0
Attached scsi generic sg2 at scsi1, channel 0, id 2, lun 0, type 0
Attached scsi generic sg3 at scsi1, channel 0, id 3, lun 0, type 0
Attached scsi generic sg4 at scsi1, channel 0, id 4, lun 0, type 0
Attached scsi generic sg5 at scsi1, channel 0, id 5, lun 0, type 0
mice: PS/2 mouse device common for all mice
serio: i8042 AUX port at 0x60,0x64 irq 12
input: AT Translated Set 2 keyboard on isa0060/serio0
serio: i8042 KBD port at 0x60,0x64 irq 1
md: raid0 personality registered as nr 2
md: raid1 personality registered as nr 3
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
EISA: Probing bus 0 at 0000:00:0e.0
EISA: Mainboard INT31C0 detected.
EISA: Detected 0 cards.
NET: Registered protocol family 2
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 131072 bind 65536)
ip_conntrack version 2.1 (4096 buckets, 32768 max) - 164 bytes per conntrack
ip_tables: (C) 2000-2002 Netfilter core team
NET: Registered protocol family 1
NET: Registered protocol family 17
NET: Registered protocol family 15
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 408k freed
Adding 995988k swap on /dev/hde1. Priority:-1 extents:1
![[n e t i l i u m]](/images/netilium_equipment_corporation.png){kind=small}
