Hardware inventory: AlphaServer DS10L

Model	AlphaServer DS10L
Manufacturer	Compaq
CPU	Single EV6(21264), 466MHz, 2MB cache
Memory	128MB
Internal storage	IBM-DTLA307030, 30 GB
Operating system	Tru64 UNIX 5.1A
Introduced	May 1999
Bootup sequence

CPU 0 booting

Resetting I/O buses...
...waiting for ewa0.0.0.9.0 to start...
...
ewa0: link failed : Using  100BaseTX: full duplex

ewb0: link up : Negotiated  100BaseTX: full duplex
(boot dqa0.0.0.13.0 -flags A)
block 0 of dqa0.0.0.13.0 is a valid boot block
reading 19 blocks from dqa0.0.0.13.0
bootstrap code read in
base = 200000, image_start = 0, image_bytes = 2600(9728)
initializing HWRPB at 2000
initializing page table at 7f2e000
initializing machine state
setting affinity to the primary CPU
jumping to bootstrap code

UNIX boot - Wednesday August 01, 2001

Loading vmunix ...
Loading at 0xfffffc0000230000

Sizes:
text =  5501440
data =   870912
bss  =  1677136
Starting at 0xfffffc0000240660

Loading vmunix symbol table ... [1375728 bytes]
Alpha boot: available memory from 0xdfa000 to 0x7f2c000
Compaq Tru64 UNIX V5.1A (Rev. 1885); Wed Jan  5 17:58:29 CET 2005
physical memory = 128.00 megabytes.
available memory = 113.19 megabytes.
using 444 buffers containing 3.46 megabytes of memory
Firmware revision: 6.8-9
PALcode: UNIX version 1.92-73
AlphaServer DS10L 466 MHz
pci0 (primary bus:0) at nexus
isa0 at pci0
gpc0 at isa0
gpc1 not probed
ace0 at isa0
ace1 at isa0
lp0 at isa0
fdi0 at isa0
tu0: DECchip 21143: Revision: 4.1
tu0: auto negotiation capable device
tu0 at pci0 slot 9
tu0: DEC TULIP (10/100) Ethernet Interface, hardware address: 08-00-2B-87-47-AC
tu0: auto negotiation on: will advertise 100BaseTX (UTP) port: full duplex
tu1: DECchip 21143: Revision: 4.1
tu1: auto negotiation capable device
tu1 at pci0 slot 11
tu1: DEC TULIP (10/100) Ethernet Interface, hardware address: 08-00-2B-87-47-DD
tu1: auto negotiation on: will advertise 100BaseTX (UTP) port: full duplex
ata0 at pci0 slot 13
ata0: ACER M1543C
scsi0 at ata0 slot 0 rad 0
scsi1 at ata0 slot 1 rad 0
Created FRU table binary error log packet
kernel console: ace0
dli: configured
NetRAIN configured.
i2c: Server Management Hardware Present
vm_swap_init: swap is set to eager allocation mode
Checking device naming:
    Passed.
Checking local filesystems
Mounting / (root)
user_cfg_pt: reconfigured
root_mounted_rw: reconfigured
user_cfg_pt: reconfigured
root_mounted_rw: reconfigured
user_cfg_pt: reconfigured
dsfmgr: NOTE: updating kernel basenames for system at /
    scp kevm tty00 tty01 lp0 dmapi dsk0
Mounting local filesystems
exec: /sbin/mount_advfs -F 0x14000 root_domain#root /
root_domain#root on / type advfs (rw)
/proc on /proc type procfs (rw)
exec: /sbin/mount_advfs -F 0x4000 usr_domain#usr /usr
usr_domain#usr on /usr type advfs (rw)
exec: /sbin/mount_advfs -F 0x4000 usr_domain#var /var
usr_domain#var on /var type advfs (rw)
Subsystem hwautoconfig was successfully configured.
Jan  5 17:59:58 update: started

Checking for Installation Tasks...
        The following STREAMS devices were created:
                          Name      Major      Minor
                          ----      -----      -----
        /dev/streams/xtiso/udp         32         59
        /dev/streams/xtiso/tcp         32         60
       /dev/streams/xtiso/udp+         32         61
       /dev/streams/xtiso/tcp+         32         62
       /dev/streams/xtiso/udp5         32         63
       /dev/streams/xtiso/tcp5         32         64
                     /dev/ptmx         32         65
              /dev/streams/dlb         32         66

Executing Installation Tasks...
The system is coming up. Please wait...
Checking for crash dumps
Initializing paging space
Mounting Memory filesystems
evmstart: Daemon started
security configuration set to default (BASE).
File /etc/sia/matrix.conf updated successfully.
Successful SIA initialization

/usr/sbin/autopush: Can't push requested modules on STREAM for entry 36
/usr/sbin/autopush: Device (6,-1) already configured
Streams autopushes configured
Configuring network
hostname: ds10l
Loading LMF licenses
System error logger started
Binary error logger started
binlogd: failed to initialize remote logging. Please make sure the
network is set up properly and then restart binlogd.
Setting kernel timezone variable
ONC portmap service started
NFS IO service started
Mounting NFS filesystems
Preserving editor files
Clearing temporary files
Unlocking ptys
/var/adm/sendmail/aliases: 3 aliases, longest 9 bytes, 46 bytes total
SMTP Mail Service started.
Environmental Monitoring Subsystem Configured.
Using snmp service entry port 161.
Extensible SNMP master agent started
Base O/S subagent started
Server System subagent started
Server Management subagent started
CIM SNMP subagent started
Performance Management subagent started
Web Based Management Agent started
ConfigReport Management Module started
SysMan Management Module started
Threshold Management Subagent started
Internet services provided.
Cron service started
Printer service started
SysMan authentication server (smauthd) started
SysMan Station server (smsd) started
The system is ready.



Compaq Tru64 UNIX V5.1A (Rev. 1885) (ds10l) console

login: