Hardware inventory: AlphaServer 4100 #2
To index
Bootup sequence
SROM V3.0 on cpu0
SROM V1.1 on cpu1
XSROM V6.0 on cpu0
XSROM V6.0 on cpu1
BCache testing complete on cpu0
BCache testing complete on cpu1
mem_pair0 - 512 MB
20..20..21..21..23..
please wait 12 seconds for T24 to complete
24..24..
Memory testing complete on cpu1
Memory testing complete on cpu0
starting console on CPU 0
sizing memory
0 512 MB EDO
starting console on CPU 1
probing IOD1 hose 1
bus 0 slot 1 - NCR 53C810
bus 0 slot 2 - QLogic ISP10X0
probing IOD0 hose 0
bus 0 slot 1 - PCEB
probing EISA Bridge, bus 1
bus 0 slot 2 - S3 Trio64/Trio32
bus 0 slot 3 - DECchip 21140-AA
bus 0 slot 4 - DECchip 21140-AA
** keyboard error **
configuring I/O adapters...
ncr0, hose 1, bus 0, slot 1
isp0, hose 1, bus 0, slot 2
floppy0, hose 0, bus 1, slot 0
tulip0, hose 0, bus 0, slot 3
tulip1, hose 0, bus 0, slot 4
System temperature is 31 degrees C
AlphaServer 4100 Console V6.0-4, 10-MAY-2001 10:11:42
CPU 0 booting
(boot dkb600.6.0.2.1 -flags A)
block 0 of dkb600.6.0.2.1 is a valid boot block
reading 19 blocks from dkb600.6.0.2.1
bootstrap code read in
Building FRU table
base = 200000, image_start = 0, image_bytes = 2600
initializing HWRPB at 2000
initializing page table at 1f2000
initializing machine state
setting affinity to the primary CPU
jumping to bootstrap code
UNIX boot - Wednesday October 16, 2002
Loading vmunix ...
Loading at 0xfffffc0000230000
Sizes:
text = 5758592
data = 996304
bss = 1791392
Starting at 0xfffffc0000242190
Loading vmunix symbol table ... [1425840 bytes]
Alpha boot: available memory from 0x1a1a000 to 0x1fffc000
Compaq Tru64 UNIX V5.1B (Rev. 2650); Wed Nov 12 20:59:47 CET 2003
physical memory = 512.00 megabytes.
available memory = 485.88 megabytes.
using 1920 buffers containing 15.00 megabytes of memory
Master cpu at slot 0
Starting secondary cpu 1
Firmware revision: 6.0
PALcode: UNIX version 1.23
AlphaServer 4100 5/466 4MB
pci1 (primary bus:1) at mcbus0 slot 5
Loading SIOP: script c0000000, reg 7feef00, data c000a000
scsi0 at psiop0 slot 0 rad 0
isp1 at pci1 slot 2
isp1: QLOGIC ISP1040B/V2
isp1: Firmware revision 5.57 (loaded by console)
isp1: Fast RAM timing enabled.
scsi2 at isp1 slot 0 rad 0
pci0 (primary bus:0) at mcbus0 slot 4
eisa0 at pci0
ace0 at eisa0
ace1 at eisa0
lp0 at eisa0
gpc0 at eisa0
fdi0 at eisa0
fd0 at fdi0 unit 0
s3trio0: S3 Trio64V+ (SVGA) Plug-N-Play, 1.0 Mb
s3trio0 at pci0 slot 2
tu0: DECchip 21140: Revision: 2.0
tu0: auto negotiation capable device
tu0 at pci0 slot 3
tu0: DEC TULIP (10/100) Ethernet Interface, hardware address: 00-00-F8-06-F2-96
tu0: auto negotiation off: selecting 10BaseT (UTP) port: half duplex
tu1: DECchip 21140: Revision: 2.2
tu1: auto negotiation capable device
tu1 at pci0 slot 4
tu1: DEC TULIP (10/100) Ethernet Interface, hardware address: 00-00-F8-1A-13-A2
tu1: auto negotiation off: selecting 100BaseTX (UTP) port: half duplex
Created FRU table binary error log packet
kernel console: ace0
i2c: Server Management Hardware Present
dli: configured
NetRAIN configured.
Random number generator configured.
vm_swap_init: swap is set to eager allocation mode